MAP: How much energy is the world using?

It may come as no surprise that large, energy-rich countries like the United States use the most energy, but how much per person? And which countries are using the least?

This map includes energy consumption data from the International Energy Agency and includes electricity, as well as fossil and gathered fuels. The numbers are from 2010 – the last year for which complete numbers are available.

For a larger view, click the map below, or click here.

 

WorldMap - Energy Consumption Per Capita 2010

 

more »

Wind Science, Energy, and Growing Prevalence

Wind is the kinetic energy of molecules in the air. Wind has powered ships and mills for centuries or longer.

Modern windmills convert the wind into rotational energy by allowing the air molecules to bombard the blades, turning them. The blades are connected to turbines, which generate electricity from that rotational energy.

Wind energy is one of the cleanest forms of energy available because it doesn’t require a fuel or produce greenhouse gas or other bi-products, outside of those from production and maintenance of equipment and transmission.

Wind turbines themselves take up only a small area compared to their generating potential, making it possible to install them on agricultural, forest, or grazing lands.

RAPID GROWTH

In just ten years, wind power in the United States grew more than ten-fold, from just over 2,000 megawatts in 1999 to more than 34,000 megawatts in 2009, when wind accounted for 9 percent of renewable energy produced in the country and more than geothermal and solar combined.

Here’s an animated map of wind development from 2000 to 2010.

Texas, Iowa, and Minnesota had the greatest wind capacity in 2010. Additionally, at least 27 other states used wind to generate electricity that year.

DRAWBACKS TO WIND ENERGY

Wind is an intermittent resource, meaning that the windmills can’t continuously and predictably produce energy. They only work when the wind blows, and they can only work as hard as the wind is blowing at that time.

Research is ongoing into predicting what regions of the country have significant wind resources suitable for wind development, a process that requires computer programming and meteorological knowledge.

Furthermore, public and private researchers are working to produce better models of wind on an hourly, daily, and seasonal basis to make it easier for wind energy producers to forecast their output and sell it ahead of time.

Another major hurdle to wind power is that it is expensive compared with fossil fuel-based electricity. Modern windmills cost a lot to design and build, especially as they have to be strong enough to endure extreme weather, even though they will mostly operate in moderate weather. That makes competing with other energy sources difficult without government intervention.

Some people don’t like the way windmills look, and windmills can also kill bats and birds, though newer designs have slower and less deadly blades. A 2010 study published in the Journal of Ornithology estimated that windmills kill around 440,000 birds every year. However, the same study showed that house cats kill more than 1,000 times that number, as many as 500 billion per year.

SOURCES
more »

Photovoltaic Cells, Solar Power, and LEDs

Most of the world’s energy can go back to our sun. Every day we are heated by its electromagnetic rays, and plants use the sun’s energy to make sugars and ultimately proteins and other good things to eat. Fossil fuels were also once made from these plant and other organisms that relied on the sun’s energy millions of years ago. Today, humans can convert the sun’s energy directly into electricity, through solar thermal and solar photovoltaic systems.

SOLAR THERMAL OR PHOTOVOLTAIC?

Solar panels, also called solar thermal, convert sunlight to heat and then heat to electricity. Photovoltaic cells, or solar cells, convert sunlight directly into electric current by way of carefully-engineered semiconductor materials.

Though solar photovoltaics are more efficient converters of sunlight, they are also more expensive.

As of May 2011, the world’s largest solar power plant is a concentrating solar thermal power plant in the Mohave desert in California. Solar Energy Generating Systems has a capacity of 310 megawatts and uses parabola-shaped reflective troughs to concentrate electromagnetic radiation.

The world’s largest solar photovoltaic plant is probably the Sarnia Solar Project in Ontario, Canada. It has a capacity of roughly 80 megawatts.

HOW SOLAR THERMAL WORKS

Sunlight heats a design element (water, air, chemical fluids), and that thermal energy is transmitted for other applications, such as heating water, heating space, or generating electricity. In solar thermal power plants, sunlight heats a specialized fluid, which in turn heats water into steam, which can run turbines and produce electricity.

Solar thermal power plants use concentrators that bounce the sunlight off elliptical mirrors to a central tube, in which the specialized fluid lies.

HOW PHOTOVOLTAICS WORK

Photovoltaic cells are made of specialized diodes. Electrons (natural components of atoms) in the photovoltaic cells absorb light, which excites them to a state where they can be conducted as electrical current. This difference in energy, between the valence band (the state of a normal electron staying around its home atom) to the conduction band (electron free to move between atoms) is called the band gap.

Solar photovoltaic farm in Indonesia. Photo by Chandra Marsono.

Well-engineered photovoltaics have a band gap that coincides with the energies of as broad a spectrum of light as possible, to convert the maximum amount of the sunlight into electricity.

As sunlight energy pops electrons into the conduction band and away from their home atoms, an electric field is produced. The negatively-charged electrons separate from the positively-charged “holes” they leave behind, so that when electrons are freed into the conduction band, they move as electric current in the electric field, electricity.

PHOTOVOLTAICS ARE MADE OF SPECIALIZED MATERIALS

An ever-expanding variety of semiconductor materials can be used to make solar cells; universities and companies worldwide are researching these options, from special bio-plastics to semiconductor nanocrystals. Nonetheless, the photovoltaic cells available today require precise manufacturing conditions and are therefore far more expensive to produce than solar panels.

Silicon has to be processed under clean room conditions — carefully regulated atmospheres — to remove impurities and prevent introducing contaminants, both of which can change the band gap. Thin film-based photovoltaics require special production methods, like chemical vapor deposition. Semiconductor processing also uses strong acids and often dangerous chemicals for etching.

Today, commercially-sold cells are made from purified silicon or other crystalline semiconductors like cadmium telluride or copper indium gallium selenide.

WHERE DO WE GET THE STARTING MATERIALS?

Silicon is plentiful in the Earth’s crust. Cadmium is a readily available but highly toxic heavy metal, as is arsenic, another chemical used in some cells. As tellurium demand is only recently rising in response to solar demand, it’s unknown what the global supply is for this unusual element but it may be quite abundant. Photovoltaics are a lively area of research, and the future production and environmental costs of starter materials, production, and pollution are difficult to predict.

California, Massachusetts, Ohio, and Michigan produced the most photovoltaics in 2009. However, that year, 58 percent of photovoltaics were imports, primarily from Asian countries like China, Japan, and the Philippines.

LED TECHNOLOGY: MORE THAN HEADLAMPS

Photovoltaic cells work in the opposite direction of light-emitting diodes, or LEDs. LEDs are used interchangeably with other lighting, like light bulbs. However, LED’s work in a completely different manner, far closer to the way photovoltaics work.

Click here see a bar chart comparing how much energy is used by various light sources.

LEDs absorb energy in the form of electricity, exciting electrons into the conduction band. When the electrons in the semiconductor material drop back into the valence band from the conduction band, they emit energy in the form of photons, or electromagnetic radiation.

It’s a highly efficient process because energy isn’t wasted on producing heat, which happens with standard tungsten filament bulbs. LEDs also last a much longer time as they do not have filaments to burn out, and because they are very small and several units are used to replace one large traditional lamp, they do not all burn out at once. That makes LEDs a good choice for stoplights or other safety critical applications.

 

more »

The Global Energy Mix and Policies

 On this page, you can find energy information about the world’s most populated countries: China, India, the United States, Indonesia, Brazil, Pakistan, Bangladesh, Nigeria, Russia, and Japan. For fossil fuel information about any country, see online tables here.

A nation’s sources of energy hinge on so many factors, from what’s naturally available to geography, political history, and relative wealth.

Even though energy demand is increasing rapidly across the globe, the International Energy Agency estimates a fifth of the world population lacks access to electricity, and a whopping 40 percent of people still use traditional biomass – like wood chips – for cooking. People who live without the energy infrastructure of electricity depend on portable petroleum fuels, manure and methane gas produced from manure, wood, grass, and agricultural wastes. Because these sources of energy are informal, it’s difficult to track and include them in statistics.

World electricity and energy demands are escalating. Countries are expanding energy investment to non-fossil sources like biofuels, wind, solar, and geothermal. At the same time, they are competing to secure access to coal, natural gas, and petroleum both at home and abroad.

 

Nowhere has rapid energy growth been more conspicuous than in the world’s most populated country, China. While most countries saw moderate energy growth in the same period, this Asian nation doubled energy use in less than a decade – see graph – and surpassed the United States in total energy use in 2009, according to International Energy Agency estimates. Until 2009, the United States lead the world in total energy consumption, though not per person consumption, for decades. For a list of the top 30 countries by total energy consumption see here.

Meanwhile, less than 42 percent of people in Africa had electricity at home in 2009. South Asians seemed better off than Africans that year, at 62 percent, but the real story is much more diverse. Nearly 100 percent of Chinese had access to electricity, while in Burma, only 13 percent had access. Worldwide almost 78 percent of people had access to electricity in 2009, according to the International Energy Agency.

 

ENERGY IN THE WORLD’S MOST POPULATED COUNTRIES

 

CHINA (Pop. 1.3 billion)

Between 2008 and 2035, China may triple its electricity demand, adding power plant capacity equal to the current U.S. total, the International Energy Agency projects in one scenario of the 2010 World Energy Outlook.

China is the world’s most populated country and also the world’s largest energy consumer. China gets most of its energy from coal, 71 percent in 2008. China is also the world’s biggest coal producer but only third, behind the United States and Russia, in coal reserves.

In 2008, China generated another 19 percent of its energy from oil, which it imported from all over the world, more than half came collectively from Saudi Arabia, Angola, Iran, Oman, Russia, and Sudan. China used to export its oil, but by 2009 automobile investment was expanded by so much, the country became the second largest oil importer (United States is first).

China is in hot pursuit of securing as much oil as possible, as the nation’s reliance on imported oil is growing far more rapidly than its oil production. Several powerful, national oil companies provide the domestic oil, both from on and off-shore sources. Furthermore, China has purchased oil assets in the Middle East, Canada, and Latin America, and it also conducts oil-for-loan exchanges with other countries, $90 billion worth since 2009, according to the U.S. Energy Information Administration.

Only a small proportion of China’s energy comes natural gas, produced domestically and imported in liquified form, but that may change as prices lower and liquified natural gas terminals are constructed.

China is the world’s biggest user of hydroelectric power, which made up 6 percent of energy and 16 percent of electricity in 2009. The country’s Three Gorges Dam, the world’s largest hydroelectric project, is expected to begin operating in 2012. Nuclear power accounts for only 1 percent of total consumption. However, China’s government predicts it will have seven times its current nuclear capacity by 2020.

A homemade oven. West Bengal, India, 2009.

Detailed data on energy in China can be found here.

 

 

 

 

 

 

INDIA (1.2 billion)

India is the world’s largest democracy. Though India’s population is close to that of China’s, it is only the world’s fifth largest energy user, behind the United States, China, Russia, and Japan.

Like China, India’s electricity comes mostly from coal. However, India doesn’t have enough electricity for everyone, and only 65 percent of the population has access to electricity.

Instead, many Indian use fuels at home for lighting and cooking. A 2004-2005 survey by the government found more than 40 percent of rural Indians used kerosene instead of electricity for home lighting. The same survey showed that for cooking, 74 percent of Indians used firewood and wood chips, 8.6 percent used liquified petroleum gas, 9 percent used dung cakes, and 1.3 percent used kerosene.

India produces oil domestically, but like China, the rate of India’s increasing oil consumption far outstrips its production. India therefore has to import oil; in 2009 its most significant sources were Saudi Arabia, Iran, Kuwait, Iraq, the United Arab Emirates, Nigeria, Angola, and Venezuela, in descending order.

India doesn’t have the electricity capacity to serve its population but aims to add many thousands of megawatts in the near future.

Like China, India has nuclear power, with 14 nuclear plants in operation and another 10 in planning, the reactors purchased from France and Russia.

 

UNITED STATES (300 million)

Until China recently outpaced it, the United States was the biggest energy consumer in the world, though per capita use isn’t the highest but in the same range as several developed countries worldwide and less than the per capita use in Canada. The United States relies on petroleum, coal, and natural gas, as well as a small part nuclear, hydroelectric, and various non-fossil sources. The Unites States has significant oil, coal, and natural gas reserves, as well as the potential for significant investment in solar, off and on-shore wind, and biofuels.

The mix of fuels that provide electricity varies widely from region to region. Find a map of fuel mix by U.S. region from the Edison Electric Insitute here.

For more U.S. information:

-Fossil fuel use in the United States, go here.
-U.S. greenhouse gas emissions and energy here.
-U.S. sources of energy, see here.

 

INDONESIA (250 million)

Indonesia is an archipelago of more than 17,000 islands — 6,000 are inhabited — and it is home to 76 active volcanoes and a significant undeveloped geothermal capacity, estimated at 28 gigawatts, about as much total electricity capacity as Indonesia had in 2008.

Indonesia’s energy demand is growing rapidly, split between coal, natural gas, and petroleum sources. Traditional sources of energy like wood and agricultural waste continue to be used, particularly in rural areas and remote islands, and the International Energy Administration estimates these fuels provide about a quarter of the country’s energy.

Indonesia exports coal and natural gas. In the past, the country also exported more oil than it used, but as of 2004 that balance changed. By 2009, the country suspended its membership in the Organization of Petroleum Exporting Countries (OPEC) because it was using so much of its own oil.

 

BRAZIL (200 million)

Tropical Brazil is the largest country in South America both in area and population, and it is the third largest user of energy in the Americas, after the United States and Canada.

Made from sugar cane, Brazil’s ethanol production is the world’s second largest, after the United States, which makes ethanol from corn.

Brazil produces almost as much petroleum as Venezuela and produces slightly more fuel than it consumes.

While Brazil depends on oil for other energy applications like transportation, the country gets an astounding 84 percent of electricity from hydroelectric dams. Brazil also has two nuclear power plants.

PAKISTAN (190 million)

Pakistan has limited access to electricity and energy sources, and its rural population still relies on gathered fuels like wood for heating and cooking.

In 2009 around 60 percent of the population had access to electricity, far better than its neighbor Afghanistan, at just 15 percent. Nonetheless, even with access, most of the population can’t rely on electricity unless they are wealthy enough to own generators. Pakistan suffers from lengthy blackouts, even in its cities, in part because of poor transmission infrastructure and widespread electricity theft. The situation is also aggravated by lack of capacity planning, insufficient fuel, and irregularities in water supply for hydroelectric.

In 2010, angry citizens protested violently after lengthy blackouts — as long as 18 hours according to Reuters — plagued the country. That summer, Pakistan has nowhere near enough electricity for its peak needs, which were roughly 25 percent more than its total production capacity. The widespread blackouts crippled the country’s textile industry, its biggest source of exports, and some reports suggest that hundreds of factories were shuttered as a result of sporadic power.

Meanwhile, several proposals for gas pipelines through Pakistan have yet to get solidified, including one from Iran to Afghanistan (which is opposed by the United States).

 

BANGLADESH (160 million)

Like nearby Pakistan and India, with which it shares cultural and political histories, Bangladesh also suffers from electricity shortages. Only 41 percent of Bangladeshis had access to electricity in 2009, according to the International Energy Administration.

Most of the electricity in this delta nation is generated from natural gas, with smaller amounts each from oil, coal, and hydroelectric sources. More than 30 percent of the country’s energy comes from biomass, agricultural wastes, and other combustible, renewable materials.

In 2011, Bangladesh signed a contract with oil company ConocoPhillips, allowing off-shore drilling for natural gas, despite internal protests that insisted Bangladesh should keep more of the gas for its own. The agreement gives 20 percent to Bangladesh.

 

NIGERIA (160 million)

Nigeria is Africa’s most populous country, and it is world famous for its oil, most of which is exported for sale by huge foreign oil companies like Royal Dutch Shell, ExxonMobil, Chevron, ConocoPhillips, Petrobras, and Statoil. Roughly 65 percent of government revenue comes from the oil sector, and around 40 percent its oil exports are sent to the United States. Nigeria also holds the largest natural gas reserves in Africa.

Extensive oil development has wreaked havoc on Nigeria’s ecology. Oil spills have polluted Nigeria’s water, affecting both fishing and agriculture. Much of Nigeria’s natural gas is flared rather than being collected and sold for fuel. Flaring involves burning off naturally-occurring gases during petroleum drilling and refining, resulting in  environmental degradation, greenhouse gas emissions and loss of revenue.

Even though Nigeria is fossil fuel-rich, only 47 percent of the population have access to electricity, and less than a fifth of energy in that country came from petroleum and natural gas in 2007, reflecting the widespread use of more traditional fuels like wood. Nigeria only used 13 percent of petroleum it produced in 2009.

 

RUSSIA (140 million)

Russia has significant wealth in fossil fuels, including the largest natural gas reserves and the second largest coal reserves, after the United States. In 2009, Russia produced more oil even than Saudi Arabia, mostly from Western Siberia. In 2009, Russia exported far more oil than it used, and 81 percent of its exports went to Europe, notably the Netherlands and Germany.

Russia is also the third largest consumer of energy in the world.

The country has a well-developed pipeline system to transport oil from remote regions, a system which is almost entirely controlled by a single state-run company, Transneft.

Like Nigeria, Russia flares gas in the process of drilling and refining oil, and in 2008 Russia flared more gas than any other country in the world, 1,432 Bcf of natural gas, more than double Nigeria’s output and equivalent to the annual greenhouse gas emissions for 1.4 million passenger cars, according the calculator on the U.S. Environmental Protection Agency website and data from the U.S. Energy Information Administration.

Russia operates 31 nuclear reactors, half of which employ a similar design to the ill-fated Chernobyl plant in the Ukraine.

 

JAPAN (130 million)

Japan doesn’t have significant fossil fuel resources, one reason that much of its electricity industry relies on nuclear power. It is the world’s third largest user of nuclear power.

Japan is the world’s third larger oil consumer, and it does produce some oil domestically. However, it also imports a lot of oil and natural gas, the later in the form of liquified natural gas, or LNG. Almost half of its energy came from imported oil in 2009, and just 16 percent of Japanese energy came from a domestic source.

Japan also invests heavily in foreign oil, including in the United Arab Emirates, the Congo, Algeria, Russia, Australia, Papua New Guinea, Brazil, Canada, the United Kingdom, Vietnam, and Indonesia, to name a few.

As of June 2011, Japan is still recovering from a massive earthquake and tsunami that devastated its northeast coast on March 11, 2011, forcing the shutdown of several nuclear reactors as well as damaging refineries, oil and gas generators, and electricity transmission infrastructure.

Japan imports most of its oil from the Middle East: Saudi Arabia, Iran, Kuwait, the United Arab Emirates, and Qatar together supplied 77 percent of imports in 2009.

more »

Major sources of energy/their advantages and disadvantages

There is no easy answer to what is the best source of energy or electricity. Is the priority reliability, affordability, the economy, international human rights, limiting greenhouse gas emissions, preserving environmental resources, or human health?

x

It’s undeniable that today — whether we like it or not — humans worldwide are overwhelmingly dependent on fossil fuels: coal, oil, and natural gas. Everything eaten, worn, lived in, and bought is tied to availability of fossil fuels. Even if 100 percent of politicians were determined to stop using them today, society has neither the electricity grid nor the vehicular and industrial technology to sustain the current American lifestyle on non-fossil sources of energy. Yet.

When comparing sources of energy, it’s easy to forget how universal fossil fuels are. These sources continue to dominate for reasons that are difficult to measure, like political influence, advertising clout, and control over energy infrastructure. Other sources have disadvantages purely because they don’t fit in as well.

Volume brings another difficulty in comparing sources of energy. There is so much more fossil energy, and it’s been used for a long time, so we know a lot more about its hazards and benefits. More modern technologies are harder to quantify. Some are renewable but still pollute (biofuels), some are very clean except in accidents or waste disposal (nuclear). Most electricity sources (renewable or not) use steam turbines, and all the water to make steam has to come from somewhere, but how important should that factor be?



Clicking the graphic above will give an abbreviated chart comparing sources line by line, but that doesn’t provide anywhere close to the whole story.

Each of the following topics compares the major sources of energy  through a different lens. Though environmental and local issues may seem the most important to those of us who don’t own power plants or utility companies, the cost of energy drives which sources are actually in place today and which sources will see investment tomorrow.

 

 

 

 

 

 

 

 

 

 

 


Source: U.S. Energy Information Administration

more »

The Price of Gasoline: How it Rises and Falls

Menlo Park, CA, April 2011

WHY GAS PRICES CHANGE

The price of gasoline fluctuates with several markets, not only the retail market of service stations. In fact, when looking at the national average gasoline at the pump, the international crude oil market is the single biggest factor determining the price.

 

 

 

THE INTERNATIONAL OIL MARKET IS VOLATILE

International crude oil prices can change according to what OPEC, the Organization of the Petroleum Exporting Countries, decides to do, because they own most of the world’s proven oil reserves and produced about 40 percent of the world’s oil supply in 2010. OPEC is the largest entity involved in crude oil production, and it holds prices at a particular level by slowing production and withholding supply.

In general, when economic growth slows globally, demand for crude slows and the price of oil drops, which is reflected back at the pump.

Oil prices can also fluctuate because of oil traders, those who buy and sell crude oil before it’s refined into fuels and other products. Traders are very sensitive to  political instabilities – well before there are actual restrictions on oil supply – such as occurred during the Egyptian revolution of 2011, when oil prices increased as oil traders worried about crude traveling through the Suez Canal, even though only 2 percent of the world supply ships through that waterway, which is controlled by Egypt.

The events and conditions that convince oil traders to buy and sell are sophisticated and carefully tracked by authorities here and internationally because oil is so critical to the global economy. However, even though many monitor oil prices carefully, the market can be manipulated.  For example, in May 2011, the United States government alleged that Australian and American oil traders fraudulently restricted supply  to hike up crude prices. U.S. Suit Sees Manipulation of Oil Trades.

 

 

Note: the Transportation and Marketing costs in the above chart were calculated by the Energy Information Administration as the remaining difference between the average retail cost and the other three components.

 

WHY PRICES ALSO VARY STATE-TO-STATE AND CITY-TO-CITY

Regionally, the price of gasoline can change because of local competition, rents, local laws, and temporary shortages, particularly if there’s a limited amount of refined oil. Some states are just plain closer to the refineries, and some states have emissions-related requirements for gas that limit the source of gas to certain refineries.

Californians pay some of the highest gas prices, not because their state tax rates, but because of stringent requirements on the blend of gasoline allowed to be sold. That means there are few refineries outside of California that can supply gas to the state. The elevated price is both due to limited supply from refineries and a higher refining cost.

In other states, the distance to refineries can add cost too. Hawaii is far away from almost everywhere, and it probably comes as no surprise that gasoline prices in that island state are high. Average prices by state are compiled here.

Geography and laws about what can go in the gas sold in a state contribute a lot to the price of a gallon of gasoline, perhaps significantly more than the factor that’s often blamed for wide-ranging prices, taxes.

 

TAXES

Compared to Europe, Americans pay far lower taxes on gasoline, in the range of 15 percent (see chart above) as compared to more than 50 percent for some countries. For a chart of how much tax various countries pay, go here.

The federal government applies a per gallon tax on gasoline and diesel in every state.Then, individual states and even counties add their own taxes, which can be both sales and fuel taxes. For historical and current gasoline taxes by state, you can visit the Federal Highway Administration website here. Fuel taxes are applied by the gallon. Sales tax is applied to the overall cost of the gas, by percent.

The most expensive states to buy regular gasoline in 2009 were, on average, Alaska, Hawaii, and California. The cheapest states were Kansas, Arkansas, and Tennessee, even though Arkansas, Kansas, and Tennessee all charge higher per gallon fuel taxes than California.

Californians also paid the same rate of sales tax, 6 percent, as many other states in 2010, like Michigan, Maine, Tennessee, and Minnesota. However, since their base price of gas is higher, the percent sales tax was higher too.

For recent gas prices by region, go here.

Other costs that affect the price of gas include distribution (shipping and trucking crude oil to refineries and then to consumers) and refining (turning crude oil into gasoline, a mixture of carbon-based liquids). For more information about our dependence on crude oil, see here.

 

more »

The Connections Between Greenhouse Gas Emissions and Energy

Most of the greenhouse gas emitted through human activity comes from the production of energy.

This group of gases is thought to contribute to global climate change, long-term shifts in weather partly due to the tendency of these gases to trap energy, in the form of electromagnetic radiation from the sun, that would otherwise have been reflected back out into space. For more about the relationship between the climate and greenhouse gases, go here.

Noteworthy greenhouse gases  are carbon dioxide, nitrous oxide, methane, hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), and sulfur hexafluoride (SF6).

Energy creation results in such a high level of greenhouse gas because the vast majority of energy we use — regardless of what country we live in — comes from burning something, usually coal, petroleum fuels, natural gas, or wood. More than 80 percent of U.S. energy in 2009 came from the combustion of fossil fuels.  Go here for more information about how combustion works.

WE’VE BURNED THINGS FOR EONS, WHY IS IT DIFFERENT NOW?

Plants and some types of microscopic organisms take carbon dioxide gas out of the air and turn it back into solid, carbon-based materials like plant fibers, using the energy of sunlight. The basis for all of our fuels, even the fossil fuels, comes from exploiting the fact that organisms convert  light energy into chemical energy, a potential energy source inside the plant or organism’s cells, whether the energy was converted in the last few decades (wood, biodiesel, ethanol) or millions of years ago (fossil fuels). Today, however, organisms don’t have the capacity to capture anywhere near as much of the greenhouse gas carbon dioxide as we produce, partly because we are burning fuels produced over millions of years.

EMISSIONS ARE A WORLDWIDE PHENOMENON

The United States produces more greenhouse gas each year per person than most other countries. However, even if we stopped producing any carbon dioxide at all, which is unlikely, the world would still keep producing 80 percent of its former output. Other regions produce just as much as we do, particularly Europe and China.

Furthermore, instead of holding steady at a particular emission rate, every year we use more energy and therefore emit more greenhouse gas. For a graph of atmospheric carbon dioxide by year, go here.

When we talk about energy-related emissions, we don’t only mean electricity. Energy involves burning oil and natural gas for heating, burning gasoline, diesel, and jet fuels for transportation. Transportation accounted for just over a third of all carbon dioxide emissions in 2009, electricity was almost 40 percent and residential, commercial, and industrial production, excluding electricity, made up roughly 26 percent.

Some greenhouse gases are thought to alter the climate more than others. Nitrous oxide is a much smaller percent of the gas mix than carbon dioxide, but for its weight it has a much stronger heat-trapping capability.

For more information go to The connection between greenhouse gases, climate change, and global warming.

Each year what proportion of emissions are man-made are carefully tracked by several agencies nationally and internationally, including the National Oceanic and Atmospheric Administration, the National Weather Service, and the National Aeronautics and Space Administration.

Sources:

U.S. Geological Survey
U.S. Energy Information Administration

U.S. Environmental Protection Agency
U.S. National Oceanic and Atmospheric Administration
CIA World Fact Book
World Energy Council
National Renewable Energy Laboratory
Emissions of Greenhouse Gases in the United States 2009: Independent Statistics & Analysis. U.S. Energy Information Administration, Department of Energy. March 2011.

more »

The Connection Between Greenhouse Gases, Climate Change & Global Warming


 

WHAT IS THE DIFFERENCE BETWEEN CLIMATE CHANGE AND GLOBAL WARMING?

Climate change is the shift in long-term, global weather patterns due to human action; it’s not exclusive to warming or cooling.

Climate change includes any change resulting from different factors, like deforestation or an increase in greenhouse gases. Global warming is one type of climate change, and it refers to the increasing temperature of the surface of Earth. According to NASA, the term global warming gained popular use after geochemist Wallace Broecker published a 1975 paper titled Climatic Change: Are We on the Brink of a Pronounced Global Warming?

Since 1880, the average surface temperature of the Earth has increased by roughly 0.9 degrees Fahrenheit, but the rate it’s increasing is faster than that, depending on which region you live in. If you’re closer to the equator, temperatures are increasing more slowly. The fastest increase in temperatures in the United States is in Alaska, where average temperatures have been increases by more than 3 degrees Fahrenheit per century. For a graph of average global temperatures by year, see the NASA website here.

 

HOW GREENHOUSE GASES RELATE TO CLIMATE CHANGE

Greenhouse gases are those thought to contribute to the greenhouse effect, an overall warming of the Earth as atmospheric gases trap electromagnetic radiation from the sun that would otherwise have been reflected back out into space.

Noteworthy greenhouse gases are methane, nitrous oxide, carbon dioxide, hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), and sulfur hexafluoride (SF6). These gases are thought to affect the climate directly and indirectly, even though they constitute only a small fraction of the blanket of gases that make up the atmosphere.

Currently, the composition of the atmosphere is mostly nitrogen and oxygen, with just 0.033 percent carbon dioxide and all other gases accounting for even less.

 

WHICH GASES CONTRIBUTE THE MOST?


According to 2010 models cited by NASA, 20 percent of the greenhouse effect is attributed directly to carbon dioxide and 5 percent to all other greenhouse gases. The remaining 75 percent of the greenhouse effect is thought to be due to water vapor and clouds, which are naturally-occurring. However, even though carbon dioxide and the other greenhouse gases are such a small percentage of the total gas in the atmosphere, they affect when, where and how clouds form, so greenhouse gases have some relevance when it comes to 100 percent of the greenhouse effect. Carbon dioxide is thought to modulate the overall climate, like a atmospheric thermostat.

Some greenhouse gases are produced in natural processes, like forest fires, animal manure and respiration, or volcanic eruptions. However, the majority of new greenhouse gases are produced from industrial processes and energy production.

The four largest human sources of U.S. greenhouse gases in 2009 were energy, non-fuel use of fossil fuels, natural gas production, and cement manufacture, in descending order. Non-fuel, greenhouse gas-producing applications of fuels include industrial production like asphalt, lubricants, waxes and other . Emissions related to cement manufacture happen when limestone (calcium carbonate) is reacted with silica to make clinker, the lumps ground to make cement. ( Emissions of Greenhouse Gases in the United States 2009: Independent Statistics & Analysis.)

more »

Petroleum, Natural Gas, and Coal

The world depends on fossil fuels for its energy, and the United States is no exception. The vast majority of U.S. energy — more than 80 percent in 2009 — comes from burning fossil fuels. (more…)

more »

Historical Events in Nuclear Fission

As is the case with so many scientific fields, the history of nuclear physics and energy development has always been wrapped up with the history of modern warfare.

An unprecedented level of research went into the American bomb program, applying a rapidly evolving understanding of nuclear physics immediately to building a weapon. That investment spurred the rest of the world to pursue nuclear fission, often using the energy as an excuse for the weapons development. Rather than isolate nuclear energy from its less peaceable counterpart, the timeline incorporates all types of nuclear history.

Recent nuclear media coverage:

Germany begins shutting down old reactors and considers swearing off nuclear power entirely. Germany Dims Nuclear Plants, but Hopes to Keep Lights On.

New evidence that Japan’s troubled reactors were destined to malfunction, tsunami or not, in The Explosive Truth Behind Fukushima’s Meltdown.

Add more here. TK

more »